Pabrik Langsung Ngajual Alloy Steel Lifting Sling Load Chain pikeun Hoist Mini 3mm * 9mm G80 Angkat Ranté Beban
Pabrik Langsung Ngajual Alloy Steel Lifting Sling Load Chain pikeun Hoist Mini 3mm * 9mm G80 Angkat Ranté Beban
Kategori
Angkat sareng kempelan, ranté, ranté link pondok, ranté link buleud ngangkat, ranté kelas 80, ranté G80, ranté aisan, ranté aisan, DIN 818-2 ranté kasabaran sedeng pikeun ranté slings Kelas 8, ranté baja alloy
Aplikasi
Angkat sareng nyentak, ngangkat beban, ngariung beban
SCIC Kelas 80 (G80) ranté pikeun ngangkat dijieun salaku per EN 818-2 standar, kalawan nikel kromium molybdenum baja alloy mangan per standar DIN 17115; dirancang ogé / diawaskeun las & perlakuan panas mastikeun ranté sipat mékanis kaasup gaya test, megatkeun gaya, elongation & karasa.
Gambar 1: Dimensi link ranté kelas 80
meja 1: Kelas 80 (G80) dimensi ranté, EN 818-2
| diaméterna | pitch | lebar | beurat unit | |||
| nominal | kasabaran | p (mm) | kasabaran | jero W1 | luar W2 | |
| 6 | ± 0,24 | 18 | ± 0,5 | 7.8 | 22.2 | 0.8 |
| 7 | ± 0,28 | 21 | ± 0,6 | 9.1 | 25.9 | 1.1 |
| 8 | ± 0,32 | 24 | ± 0,7 | 10.4 | 29.6 | 1.4 |
| 10 | ± 0.4 | 30 | ± 0,9 | 13 | 37 | 2.2 |
| 13 | ± 0,52 | 39 | ± 1.2 | 16.9 | 48.1 | 4.1 |
| 16 | ± 0,64 | 48 | ± 1.4 | 20.8 | 59.2 | 6.2 |
| 18 | ± 0,9 | 54 | ± 1.6 | 23.4 | 66.6 | 8 |
| 19 | ± 1 | 57 | ± 1.7 | 24.7 | 70.3 | 9 |
| 20 | ± 1 | 60 | ± 1.8 | 26 | 74 | 9.9 |
| 22 | ± 1.1 | 66 | ± 2.0 | 28.6 | 81.4 | 12 |
| 23 | ± 1.2 | 69 | ± 2.1 | 29.9 | 85.1 | 13.1 |
| 24 | ± 1.2 | 72 | ± 2.1 | 30 | 84 | 14.5 |
| 25 | ± 1.3 | 75 | ± 2.2 | 32.5 | 92.5 | 15.6 |
| 26 | ± 1.3 | 78 | ± 2.3 | 33.8 | 96.2 | 16.8 |
| 28 | ± 1.4 | 84 | ± 2,5 | 36.4 | 104 | 19.5 |
| 30 | ± 1,5 | 90 | ± 2.7 | 37.5 | 105 | 22.1 |
| 32 | ± 1.6 | 96 | ± 2.9 | 41.6 | 118 | 25.4 |
| 36 | ± 1.8 | 108 | ± 3.2 | 46.8 | 133 | 32.1 |
| 38 | ± 1.9 | 114 | ± 3.4 | 49.4 | 140.6 | 35.8 |
| 40 | ± 2 | 120 | ± 4.0 | 52 | 148 | 39.7 |
| 45 | ± 2.3 | 135 | ± 4.0 | 58.5 | 167 | 52.2 |
| 48 | ± 2.4 | 144 | ± 4.3 | 62.4 | 177.6 | 57.2 |
| 50 | ± 2.6 | 150 | ± 4,5 | 65 | 185 | 62 |
meja 2: Kelas 80 (G80) sipat mékanis ranté, EN 818-2
| diaméterna | wates beban gawé | kakuatan buktina manufaktur | min. kakuatan megatkeun |
| 6 | 1.12 | 28.3 | 45.2 |
| 7 | 1.5 | 38.5 | 61.6 |
| 8 | 2 | 50.3 | 80.4 |
| 10 | 3.15 | 78.5 | 126 |
| 13 | 5.3 | 133 | 212 |
| 16 | 8 | 201 | 322 |
| 18 | 10 | 254 | 407 |
| 19 | 11.2 | 284 | 454 |
| 20 | 12.5 | 314 | 503 |
| 22 | 15 | 380 | 608 |
| 23 | 16 | 415 | 665 |
| 24 | 18 | 452 | 723 |
| 25 | 20 | 491 | 785 |
| 26 | 21.2 | 531 | 850 |
| 28 | 25 | 616 | 985 |
| 30 | 28 | 706 | 1130 |
| 32 | 31.5 | 804 | 1290 |
| 36 | 40 | 1020 | 1630 |
| 38 | 45 | 1130 | 1810 |
| 40 | 50 | 1260 | 2010 |
| 45 | 63 | 1590 | 2540 |
| 48 | 72 | 1800 | 2890 |
| 50 | 78.5 | 1963 | 3140 |
| catetan: total elongation pamungkas dina gaya megatkeun nyaéta mnt. 20%; | |||
| parobahan Wates Beban Gawé dina hubungan suhu | |
| Suhu (°C) | WLL% |
| -40 nepi ka 200 | 100% |
| 200 nepi ka 300 | 90% |
| 300 nepi ka 400 | 75% |
| leuwih 400 | teu bisa ditarima |
